How to construct to a rabbit a cage

How to construct to a rabbit a cage

Animals Hits: 52

Keeping of domestic rabbits in a cage has many advantages. The owner knows for sure how many forages were eaten by his pets, watches that to everyone got equally. At cellular contents there is possible a breeding work. Besides, the owner will notice at once that stole got sick, and will be able to provide medical care in due time.

It is required to you

Instruction

1. Begin with a framework. For this purpose mark and saw a bar on pieces of the necessary length. You need about 4 laths of each size. Hammer together a rectangular parallelepiped from pieces. From the sheet of plywood cut the rectangles equal by the sizesto back and sidewalls. Sheathe them a framework from outer side.

2. Cut out from a close-meshed grid a rectangle, by the sizes the respective 2/3 areas of a cage. Beat it to the lower bars of a framework so that it was closed with one party of a cage – it will be fodder office. For nested office make a continuous deal floor.

3. Between offices it is necessary to put a partition. It is made of the rectangular sheet of plywood, by the sizes corresponding to width and height of a cage. In the middle cut an opening in order that rabbits could pass freely there. Saw off from laths 2 pieces, the equal length and width of a cage. Saw off corners so that at connection of laths at right angle there were no gaps. Beat laths over a grid on internal perimeter of a cage.

4. Make a roof of the sheet of plywood or boards. It has to be slightly wider and longer than a cage, approximately on 3-5 cm from each party. On the one side of a framework attach door loops.

5. Make doors. One of them wooden, it is intended for nested office. Its length equals about 1/3 lengths of a cage. For fodder office make one or two doors of a large grid and laths. At first make a door framework of laths, then attach the metal gauze. Suspend doors on door loops. Attach hooks or latches.

Author: «MirrorInfo» Dream Team

Print