Examining the small fishes swimming in an aquarium, the observer involuntarily notices the objects which are behind an aquarium or the drawing of wall wall-paper. To keep effect of depth of space of the underwater world it is enough to use a special background for an aquarium, one of which are the films stickers differing in the low price and a possibility of frequent replacement. They can be established on outer side of a back wall of an aquarium, inside of its back wall and also on the thin basis from plywood or a fibreboard which fastens to an aquarium frame behind.
It is required to you
- - rubber pallet or plastic the card with smooth edges;
- - sheet of plywood or a fibreboard by the sizes of a back wall of an aquarium;
- - self-adhesive film background for aquariums.
Instruction
1. Gluing on the basis for its subsequent fastening to an aquarium wall from outer side: Cut out the basis for gluing of a film precisely by the size of a back wall of an aquarium from thin plywood, a kragis or a fibreboard (as a last resort, from dense cardboard).
2. Clean a surface dry.
3. Liberate country of a self-adhesive film picture from a protective layer no more, than on 2-3 cm from its narrow party. Operation needs to be carried out quickly enough as the glue layer of a film quickly dries up and loses the ability to sticking.
4. Apply the free glue party of a film to the basis and press it, smoothing with the rubber pallet or the plastic card on all area of a small strip of the pasted surface.
5. Unstick the following 2-3 cm of a film, pulling it on width, press the pallet, leveling the stuck together surfaces and squeezing out between them air.
6. Cut off an excess part of a film, or accurately bend and paste to a reverse side of a basis.
7. Attach the turned-out background densely to an aquarium frame an adhesive tape so that it as much as possible closed a back wall.
8. For gluing of a film with the image directly on a back wall of an aquarium from within it or outside: Use the above-stated technology of gluing of a film. At the same time it is necessary to remember that subsequently to remove it it will be difficult. This option for those who do not like to change an aquarium interior often.
9. Gluing by means of an adhesive tape: It is also possible to fix a film fragment on perimeter of an external part of a back wall of an aquarium by a bilateral or usual adhesive tape.