In spite of the fact that feeding feeding troughs cost rather not much, many fishers prefer to make them independently. How to make a feeding feeding trough with own hands?
It is required to you
- - grid chain-link galvanized;
- - lead leaf;
- - soft corrosion-proof wire;
- - electric drill;
- - bolt;
- - nut;
- - plastic bottle.
- - scissors;
- - stapler;
- - ruler;
- - puncher;
- - marker;
- - lead plate.
Instruction
1. Take a galvanized grid with a size of cells no more than 5 mm. Cut out a strip of the required size. Accurately bend cuts in future feeding feeding trough.
2. Give to a grid the necessary form, having curtailed it. Your feeding trough can be triangular, round or rectangular is a matter of taste.
3. Take a wire, it is desirable copper, and curve from it a bracket on which the fishing line will fasten.
4. Curtail sheet lead several times for giving to a feeding trough of desirable weight. Fold the turned-out strip double. Drill an opening in its center by means of a drill.
5. Insert wire fastening into a bend of a lead strip.
6. Dress the turned-out design on a wire frame. Insert a bolt into the opening drilled earlier and tighten it a nut.
7. Other widespread option is production of feeding feeding troughs from plastic bottles. Cut off a mouth and a bottom of a bottle so that the cylinder turned out.
8. Cut a cylinder by means of scissors and accurately spread out the received sheet of plastic on a table. Note the required size of a feeding trough and arrangement of openings by means of a marker. It is necessary to consider that openings have to be located in chessboard order, at distance in 2 cm from each other.
9. Make openings on the tags put earlier by means of a puncher. Cut out preparation and curtail it into a cylinder, having fixed edges by means of the stapler.
10. Take a lead plate and turn in it by the sizes of your feeding trough. Create a ring from a wire and make fixing knot, having twisted it. Establish fixing knot and clamp a lead plate.