If you want to support always the nails in excellent condition, but at the same time have no opportunity to often visit beauty shops, purchase of the corresponding device by means of which it is possible to process quite professionally nail plates and in house conditions will be the most optimal for you variant. As this thing not cheap not to be disappointed, choose it it is necessary carefully.
Instruction
1. Upon purchase of the device for manicure try to be guided by the middle price range. Very expensive devices in house conditions to you to anything, and cheap will badly work, and at breakage it will be impossible to repair them. Even if handle weight in the cheap device rather big, then it does not mean that in it there are a lot of details and they are qualitative. Most likely, at it it is simple more thickly the body.
2. Pay attention to warranty period of the device. Than it longer, than the firm releasing such machines is more reliable. It is very good if producers of these devices have the service center for service to which you will be able to address for carrying out repair or prevention.
3. Take the device which was pleasant to you in hand: the handle milling cutter has to be small in the diameter and convenient for you that it was possible to work with it without tension. The weight of the handle has to be uniform and not really small (150-200 g). In this case it will be possible to process cuticle more precisely.
4. It is better if your device is capable to carry out various operations – from correction of nails, their building and design to pedicure.
5. Whenever possible learn what margin of safety at your device. If it overheats during the long work, then can quickly leave from system. Give preference to the device which has wide range of tension – from 140 to 250 volts and operating power – from 30 to 60 W. By the way, in general give up thought of purchase of the device working on batteries. If power is less, then in operating time there is risk of its stop. The quantity of turns has to reach 30 thousand a minute, but the motor has to make as little as possible noise.
6. Ask the seller to turn on the device and be convinced that it not strongly vibrates in hand as otherwise you will not be able to perform delicate work.
7. The device has to be simple in management and is protected from accidental inclusion. Without nozzles it should not work. Try, the handle and whether it has reverse, i.e. whether it is possible to adjust reverse rotation of the tool during its work how softly turns on.
8. Pay attention to ease and speed of change of nozzles. They have to not just be inserted and pulled out, and it is convenient to be fixed.
9. Examine as the handle and wire connect. It is better if the section of wire is round, so it is less damaged in use.
10. The appearance of your device does not affect functionality and quality of its work, but if you want to use it with pleasure, this factor can be considered.