Well-groomed and beautiful nails are integral part of tidy appearance of the woman and therefore it is so important to be able to look after them correctly. One of effective methods of care for nails is hardware not cut manicure by means of which it is possible to give to the injured and deformed nails accurate and correct form. How it is correct to do hardware manicure, you learn from our article.
Instruction
1. For hardware manicure you will need the special device with nozzles of various type, for house use, with not too high speed of rotation. Rotating, nozzles of the device process your nails. Do such manicure, having carefully dried up skin of hands, two times a month.
2. Prepare nails for manicure, remove rake cuticle and erase old varnish from nails. Put on the device nozzle with average abrasive and smooth side rollers of nails. If on palms there are callosities, process them nozzles with the lowest abrasive.
3. Give to edge of nails the necessary form, polish their surface and polish, touching nail edge of nozzle and watching to scratching nail plate. Grease skin around nails with nutritious cream or oil, and massage fingers.
4. Using the device for manicure, observe safety measures. You hold it in the right hand, pressing little finger of working hand to palm, and process nails, without pressing nozzle to plate it is too dense.
5. The nozzle has to touch nail at an angle of 45 degrees. Constantly move nozzle, directing it from the center to edge, and having established the low speed of rotation of nozzles.
6. From time to time let's hands have a rest, stopping the device, and then continue to process nails, do not stop making out both hands yet. Over time you will improve the skill in the field of hardware manicure, and will be able quickly and beautifully to make out nails at high speed of rotation of nozzles.