Recently the procedure of nail extension became so popular that already forces out usual manicure. Thanks to building you can make all for two-three of hours from usual nails the whole work of art which at the same time will remain with you for a long time. Let's talk in more detail about nail extension on tipsa.
It is required to you
- - tipsa;
- - glue;
- - acrylic or gel;
- - UF-lamp
Instruction
1. Pick up materials, decide on tipsa and their form. Remember that the competent choice of tips will help to change visually shape of nails and fingers, to correct defects.
2. Before pasting tipsa, process nails by means of degreaser, in addition remove cuticle and remove varnish if that is available on nails.
3. Now take special glue, by means of brush accurately apply it on contact zone of tipsa and distribute on all inside. Now apply tipsa to nail and take within 10 seconds. Pay attention that it is necessary to paste tipsa only to half of nail.
4. Further modify shape of nail and prepare it for putting gel or acrylic. Use the modeling material and erase borders between nail and tipsy. Further take gel or acrylic and continue to erase borders between tipsy and natural plate so far they finally will not disappear. On it the procedure of building is complete. As we did service jacket building, it will not be required to varnish nails.
5. It should be noted that in spite of the fact that the procedure this quite simple, is not recommended to do it independently. If you have no sufficient skill in this technology, you risk to injure nails.
6. Also you remember that between building it is necessary to make pauses and to allow nails to have a rest. During this period do the restoring procedures on nails.