Summer vacation began. Children spend all the free time on air, playing various games. The task of parents is in creating conditions for interesting rest of the child. For example, to make a lodge for games.
It is required to you
- fir-tree bars, boards, laths, screws, crossbar, rafters,
Instruction
1. To design a lodge in which your children, simply will play with pleasure. For its production get eight not planed fir-tree bars, 110 boards of necessary length and section. Also laths in number of 7 pieces will be necessary. And 2 laths have to be of 2000 mm, and the others – 700 mm.
2. Cut out on length and a zapilita at an angle 30 degrees the top ends of rafters. Put them in pairs and connect the zapilenny ends screws. And the distance between the lower ends of rafters should not exceed 3000 mm.
3. Fasten the connected rafters with a crossbar by means of screws to a secret head. The first rafter farm is ready. From above lay bars of the following farms which also have to be cut out on length and are connected at an angle.
4. Establish support under rafters. Bricks, concrete blocks or long boards can serve as support. It is necessary to verify support across. And the interval between 2 and 3, 3 and 4 rafter farms has to be equal to 800 mm.
5. After installation of a design start flooring. By means of screws attach boards to crossbars.
6. Sheathe the lodge back. Having a board horizontally, nail up them. Then cut off on edge.
7. If desired the lodge can be divided into two rooms. For this purpose in front on the second rafter farm make a partition. Attach a board of necessary length screws to roofing laths which will need to be attached to a floor and rafters subsequently.
8. Roof. However consider that it is necessary to leave open the site of a roof where the ladder will be located. It is better to cover a roof with a blousing or the fir-trees method. Such simple actions it is possible to construct a lodge in which children will play with pleasure.