Desire to keep the most pleasant and joyful moments of our life in memory induces us to take the picture, to shoot videos which through time can admire. And there is a wish something and to feel. Today began popular to order molds of children's palms and a foot, but they can be made and independently.
It is required to you
- - plaster which grade is not lower than G-7
- - any suitable paint in a barrel for a covering of a ready mold
- - alginate
Instruction
1. If you want to make a mold of the children's handle of the house, it is necessary to prepare the following materials: plaster which grade is not lower than G-7 any suitable paint in a barrel for a covering of a ready mold and also alginate (this powder in stomatology is used for production of molds of a jaw and teeth). It is sold in dental shops and the iatrotechnics and also online. For production of a mold take three-phase alginate when it stiffens and it will be necessary to pull out the handle from solution, it will change color. Put the child to bed that in the course of production of a mold he did not pull the handle, and you could use his tranquility.
2. Prepare solution from alginate and water. For structure it is the best of all to use plastic capacity. Take water (1 part) and powder (1.5 parts). Pour alginate into water, but not on the contrary! Carefully stir the mixer. If in mix bubbles were formed, knock with capacity on a table. These manipulations should be carried out quickly because at alginate the high speed of hardening.
3. As soon as mix begins to change color, lower the child's handle in weight. Wait about a minute until solution stiffens and will begin to remind rubber a little. If to the hand laid on the surface of solution it does not stick, so it stiffened. It is possible to consider that at you it turned out to make a mold of the children's handle of the house.
4. Accurately pull out the handle of the kid from the stiffened weight not to tear a form for future mold.
5. Prepare solution from plaster and water. Pour plaster into warm water. Bring to density reminding dense sour cream. Knock on a table that there were all vials of air. Fill in ready solution in the form prepared earlier for a mold. Mix has to stiffen completely.
6. Carefully separate alginatovy weight from capacity and clean the plaster handle from gel. As necessary modify a ready mold a small emery paper. Fix preparation on a support (it is possible plaster). Paint a finished product with paint and if desired issue some amusing trifles.