Slime is a popular stress reliever toy which due to the plasticity is capable to stretch and get bizzare shapes. A ready slime it is possible to buy in shop at the price of 50-500 rubles, depending on his producer and volume. However slime is much more interesting to make with own hands, having used simple recipes and ingredients which are available in each house.
Production of slime on the submitted best recipes will not take a lot of time, at the same time slimes are carried out from make-shifts. For giving of necessary plasticity it is important to observe a dosage of the used substances and technology of preparation. At will it is possible to add dye to each slime, at the same time it is used both food, and gouache, a watercolor and other paints.
Recipe 1
It will be necessary for you:
- Dense glue (for example, PVA) — 4 tablespoons;
- Shaving foam — 4 tablespoons;
- Washing gel (for example, Persil) — 2 teaspoons.
Way of preparation:
- To enter dense glue into capacity, to add shaving foam and to vent carefully. At the same time weight will take the air form.
- Further to enter washing gel. In this case he acts as thickener. But, unlike glue, the content of gel can be regulated slightly.
- In process of gel addition, slime will become is more dense and it can be kneaded not in capacity, and in hands. Form a slime until it does not become the necessary density.
Recipe 2
It is required to you:
- Water — 3 teaspoons;
- Detergent for ware — 1 tablespoon;
- Glue PVA — 4 teaspoons;
- Flour — 1 tablespoon;
- Soda — 2 pinches;
- Naftizin — 5 drops.
Way of preparation:
- In capacity to pour water of room temperature, then to add any detergent.
- To quickly mix weight before emergence of bubbles. To enter glue, to vent.
- To put flour and soda. Now the structure needs to be kneaded intensively before acquisition of plastic properties by it.
- Often above-stated actions are enough for receiving a slime. But if weight did not get the necessary form, as thickener add Naftizin. Weight is kneaded until ready again.
Recipe 3
It is required to you:
- Glue PVA — 1 tube;
- Shaving foam — 15 tablespoons;
- Dye (gouache, watercolor) — at will;
- Thickener (Sodium Pyroborate, Naftizin) — 5 drops.
Way of preparation:
- In capacity to pour out PVA glue, then to enter shaving foam. To mix weight.
- At will it is possible to use dye, as it in this case the watercolor, gouache and so on act. When using dyes it is important to mix well weight at this stage.
- Now it is required to pour thickener. Further to mix structure before acquisition of plastic properties of slime by it. When using thickeners of difficulties with it usually does not arise.
Recipe 4
It is required to you:
- Liquid soap or shampoo — 4 teaspoons;
- Glue PVA — 1 tube;
- Toothpaste — 1/2 teaspoons;
- Dye — at will;
- Soda — 1 pinch.
Way of preparation:
- In ware to pour liquid soap or shampoo, to enter glue and to vent weight.
- To squeeze out toothpaste and to add any dye then it is obligatory to mix.
- The last ingredient — soda. After addition to knead structure before formation of a plastic slime.
Recipe 5
It is required to you:
- Transparent shampoo — 2 tablespoons;
- Transparent shower gel — 2 tablespoons;
- Office glue — 1 tube;
- Dye — at will;
- Soda — 1 pinch;
- Naftizin — 5 drops.
Way of preparation:
- In capacity to pour shampoo, to squeeze out shower gel, to mix.
- To enter office glue. At this stage it is possible to paint a slime, having added any dye. To carefully vent weight.
- That slime got a characteristic plastic form, to enter soda and to mix once again. If weight lasts insufficiently, it is possible to add Naftizin.
Preparation of slime is easily carried out by children, however work with detergents and other chemical medicines has to be made under control of adults.