To help to learn to children walkers are designed to go. the simple device which supports the child so that he did not fall, but had relative freedom at the movement, it is quite possible to make independently, store the option will not be considered by features of weight and growth of your kid.
It is required to you
- Plastic or polycarbonate frame, 2 reinforced or metal arches, 7 furniture wheels, fabric, foam rubber, liquid nails
Instruction
1. Take measurements for future product. You are interested in diameter of a circle of a frame of walkers (it depends on width of your doorways and a step of the kid), growth of the child, to be exact length of his legs.
2. By means of a construction knife cut out a frame from the sheet of polycarbonate. As a rule, its diameter is approximately equal to 70 cm on the external party. Make width to 7 cm. Carefully glue places of cuts with a dense wide adhesive tape, it is possible reinforced, it is previously expedient to melt off the soldering iron keen edges.
3. Plan a marker of the place of fastening of wheels to a frame and drill openings on diameter of fasteners.
4. Cut out the top frame (it holds sitting of the kid and fixes arches) from residues of polycarbonate and also carefully glue it with an adhesive tape.
5. Note the piece equal to length of legs of the child on arches and add 3-5 more cm. Cut off.
6. Plan places of fastening of arches on the top and lower frames. Make necessary openings and fix arches, having a little mown top concerning a bottom. Thus you receive the design reminding a curve table. The top frame "will rise" over lower just at height equal to length of legs of the kid.
7. Fit the top frame fabric (it is possible with sintepon or foam rubber inside that the child did not hit)
8. Now cut out from fabric and foam rubber the supporting pillow for a back. Sew the shorts sewed by you which will hold the child in the top frame to it. Fix sewed in the top frame. Check for durability. It was necessary to attach wheels to the lower frame and to decorate walkers with bright appliques, to hang up rattles.