Today the backpack - "kangaroo" became the popular assistant to young parents as allows to take place without difficulties together with the kid in those places where the baby carriage cannot pass. At the same time hands of the parent remain free, and the kid in a backpack - "kangaroo" seldom cries or is capricious. To have to remake the ready backpack which is quite often bought in shop, adjusting it to the size of the kid. For this reason many mothers prefer to sew such adaptation independently.
It is required to you
- - cut of fabric of 100х50 cm in size (tic, flax, jeans),
- - 3 meters of a synthetic corsage tape from 4 to 6 cm wide (depending on diameter of rings),
- - 4 metal rings,
- - 4 metal buttons.
Instruction
1. Make a pattern of the main part. She has to remind in a form an antique vase which is equal in the lower basis to about 30 cm, and in top - about 50 cm. You will find two the main fabric details, identical by the size, and also laying of the same form from a dense tic or sintepon (for winter).
2. Cut off a piece 55 cm long from a corsage tape – it will be preparation for the lower strap. On the ends of this preparation fix 2 metal rings (wooden or plastic rings do not suit for these purposes as the tree breaks up from even a superficial crack, and plastic is quite fragile). Cut off two tapes on 21 cm which later sew to the top front part of the main preparation at distance 17 cm from bottom edge of "vase". Sew two strips received from the remained piece of a corsage tape to the middle of the main part.
3. Put all main details together and stitch, having receded from edge about 1 cm. Leave the "vase" which is not sewn up a bottom side through which turn out a product.
4. Sew to bottom edge of a basis a double stitching (for reliability) a tape with rings, at the same time sewing to it also tapes for fixation of legs of the child.
5. On "ears" of the top part of "vase" make 2 loops for regulation of a tension of the bearing straps on which the child has to hang on armpits not to sit on a bottom. And sew buttons on straps.
6. On the center of a back from the face sew a pocket in which enclose a thin plate, the rectangle which is cut out from a children's board ice-boat or a piece of plywood for rigidity.
7. Instead of rings it is possible to use carbines, and instead of buttons for regulation of a tension to put buckles of the necessary width. Humeral straps can also be made not of a tape, and of the main fabric with dense laying or sintepon. The backpack can be supplied with sides for increase in reliability of a design. And for convenience of the parent under humeral straps enclose small pillows that carrying was painless and comfortable.