Backpacks allow to take necessary things on usual or bicycle walk, without occupying at the same time a hand. The kid with pleasure will throw backpack strap shoulders which are regulated on length. If to execute additional loops, then the backpack can be fixed on a trunk or a wheel of the bicycle.
It is required to you
- - Monophonic dense fabric;
- - lining fabric;
- - thin sintepon;
- - fasteners are carbines;
- - textile sling;
- - contact tape;
- - zipper.
Instruction
1. Cut out two main details of a backpack from the top fabric, leaving one and a half centimeters on allowances. The main detail represents a rectangle, with the corners which are rounded off in the top part. On a front part make applique or sew a patchpocket, otstrochiv details to the region.
2. Calculate the backpack side length which will be equal to perimeter of the rectangle lying in the basis of two already cut out parts. Halve the turned-out size. One half of a side part forms a bottom, execute the second half (top side detail) in the form of two details between which the lightning will be sewed.
3. On this backpack of a strap easily come unfastened therefore it is necessary to sew a small pocket for storage of straps. Sew it to a bottom detail. From slings make loops by means of which the backpack can be hung up on a bicycle wheel. Melt off edges of details on fire that fibers were not dismissed. Sew for the ends of loops on a piece of a contact tape (velcro). Pristrochite of a loop to a back detail of a backpack.
4. Sew on the face of two details forming backpack sidewall top a zipper. Then unbend fabric and tack it close to edge. In a ring connect a bottom to a top detail. To a back part of a backpack tack to a sling, passed throughout a framework: two on each side the top part and two – on each side lower. Between the top details sew the handle. Sew together backpack details, then turn out on the face and an otstrochita to the region.
5. Quilt a cut of the prepared lining fabric sintepon and sew from it the exact copy of a backpack. In places of sewing of a lightning unbend allowances for inner side and tack. Insert a lining into a backpack and in the place of sewing of a lightning accurately connect. Otstrochite a seam to the region on the face. Insert the ends of straps into frames of carbines and attach them to a backpack.