The laws according to which it has to be the owner of smart clothes which will be by all means shown to the same fashionistas girlfriends work in the world of Barbie. If desired it is possible to sew independently a magnificent dress which will become a subject of pride of your child.
Instruction
1. First of all it is necessary to take the chiffon having stuffing of dark blue color for a dress and thin brocade of gold color which is intended for one of the lower layers of a skirt, a collar and a belt and also a hook-and-loop closure of blue color, which length of 5 cm, and width of 0.5 cm.
2. For tailoring of a petticoat from brocade, make a pattern of a strip which length is 30 cm, and width - 11 cm. Also you will find other strip 100 cm long, and 5 cm wide. Unbend one of cuts of that strip which has length of 100 cm two times on 0.5 cm on inner side and stitch, further take away the top cut of this strip and begin to sweep off small folds, length of 30 cm will not turn out yet (we cut off the remains). To a cut which is located on a strip 30 cm long stitch that frill which with folds. The top cut of 30 centimetric strips is swept off by folds before obtaining 13 centimetric lengths. It is necessary to unbend side cuts of both frills on a wrong side two times on 0.5 cm, and then to stitch.
3. The dress is sewed in compliance with sizesof dolls which are specified in the scheme. At first the drawing of a skirt which is equal to the size Barbie is under construction. Then the paper detail needs to be cut out and put from a wrong side. Further take chalk and you circle a skirt sun contour. To cut a detail on the line, along the line of this section and in the area of the lower cut it is necessary to turn off material on a wrong side on width of 0.5 cm, to iron the iron and to stitch. The element of the top skirt is imposed on the petticoat face, then both details to us it is necessary to stitch on the top cut and to lower a little to petticoat length a little.
4. From material of blue color it is necessary to find two elements of sleeves, one detail before with a bend and two elements of a back, at the same time it is necessary to leave on back cuts an allowance of 1 cm and on the remained cuts of 0.5 cm.
5. From brocade it is necessary to find 4 elements of a collar with allowances in 0.5 cm and a strip 60 cm long, and width of 4 cm for tailoring of a belt on a dress. From all directions tucks are stitched among themselves. Those allowances which are intended for a podgibka of sleeves turn away on a wrong side and pritachivatsya.
6. Sleeves are stitched after side seams. Then to turn off allowances which fall on average cuts of a back and to tack. Further details of a bodice and skirts develop the faces, cuts around a waist grind off and edges of a bodice and back cuts of skirts are combined. That strip which consists of brocade has to be swept off in the area of a contour, at the same time fabric has to be turned in on width of 0.3 cm, and is several times wrapped up around a waist. The finishing element is the bow which is tied behind.