As in a maynkrafta to make the house beautiful and big

As in a maynkrafta to make the house beautiful and big

Fans of a game in Maynkraft try to equip for themselves the shelter where it is possible to hide from hostile characters. It can be also small construction, but many try to create big and beautiful houses. They can be built up height to several floors, to fill with furniture and the equipment, to issue in any desirable style.

In operating time it is necessary to show accuracy and attentiveness. It is better to reserve materials for construction in advance. It will be more convenient to conduct construction in the creative mode - it helps to avoid need to extract them in large numbers.

What to begin construction works with

Before starting construction, it is necessary to decide on housing type. It is possible to plan the mansion, a huge country house to several floors, a modest and cozy cottage. Then it is necessary to select the place for it. Some players prefer to locate the residence in mountains or even on water.

After the desirable option is defined, it is possible to stock up with material for building. When everything is collected in enough, work begins. The simple option to several floors can be constructed quickly, using sandstone, wool of different color and glass.

Construction of the big house

For construction of the big and beautiful house in Maynkraft the basis can be made as follows. On the site to place a connecting cube and to add to it 5 more, they adjoin not edges, but corners. So spread all four sides of future house. Then from that party where it is planned to place an input, the middle block should be deleted. From corners to lift columns, adding on everyone 4 cubes, all height of a wall will turn out 5 cubes. Such columns should be 8, between them in corners of the building there are intervals width in the diagonal of a connecting cube.

In these intervals to install unit of color wool on a connecting cube, over they are 3 glass elements. On the columns built on corners cubes are added and the interval is put so that for future wall the P-shaped design turned out. Fill the wall space rest with glass elements.

The same procedure should be repeated for all walls, except that in which the input is planned. It should be issued so that it became beautiful and noticeable. On cubes on both sides from an open aperture about 3 cubes of color wool are imposed, above connect before receiving a P-shaped figure. Close a ceiling sandstone. At the same time it is necessary to leave free an opening in 1 cube – here it is possible to build a ladder. One floor of the house can be considered ready.

On the second floor to make out all walls the same as on the first. I rat to close color wool. It is possible to make it monophonic or to lay out a pattern from squares, different in color. The ceiling which can be examined from within the house turns out. To arrange a beautiful roof, above it is necessary to make a design of material of the same color which was used for dressing of walls. On the surface of the house spread a material layer, having receded on one cube from edge, then by the same principle – one more layer.

The house is ready. It is possible to fill it from within, to equip nearby sites. This option of construction concerns the simplest. If construction is planned by more large-scale, preparation for it is required serious.

Author: «MirrorInfo» Dream Team


Print