How to activate the network interface card

How to activate the network interface card

Network interface cards are built-in and discrete. On the motherboard the network interface card, in the PCI slot – the separate card is located. For the user they work equally well.

Instruction

1. Network interface cards belong to such types of devices which often for work do not need installation of special drivers. Standard drivers for Windows ensure functioning to the majority of payments. First of all, at any problem in operation of the network interface card visit the official site of vendor. To install any devices, read instructions for holding this procedure.

2. After you install the card in the connector, and Windows will find it, it will join automatically. The main criterion of the correct installation are the blinking green and orange diodes. If you do not see it, then pull out, and then again insert a network cord, maybe, the contact was gone. If it did not help, look whether it is correct and to the respective slot the card is installed.

3. There are usually enough done operations for work with the card. But happens that it is necessary to turn on the network interface card from the Windows operating system. There are two ways for execution of this task. Open the Start menu, then click "Network connections". In the appeared window you will see an icon under the name "Connection on a Local Area Network". Right-click on it and you will select the Include item of a .voyta in a local area network – contact connection settings.

4. If in the section "Network Connections" there is no corresponding icon, then come into "Control panel" through the Start menu and select the section under the name "Device manager". Find in the list of the equipment in the opened window the inscription "Net boards". Click networking controller (the displayed device) the right mouse button and you will choose the command with the inscription "Involve". On the screen for several seconds the small window bearing the inscription "Inclusion" will appear. Everything, the network interface card is switched on. If and after that you cannot

Author: «MirrorInfo» Dream Team


Print