Today it is possible to observe emergence of many programs for message exchange and also for creation of videoconferences. Among other applications it is always possible to select several leaders, for example, with Skype for work with which to you can be required to perform audio setting.
Instruction
1. Find a label of start of the program on a desktop and left-click on it twice. In the opened window of user authentication enter the login and the password. After emergence of a main window of the program pass to audio settings for what click "Tools", select "Settings", then "Audio settings".
2. You can configure each device separately. If you want to configure a sound at the microphone, check whether the plug in the system unit is inserted into the respective slot. If you use the laptop, can miss this action, there the microphone is already built-in.
3. In the section "Microphone" select the necessary device. To expose desirable volume, tell something in the microphone. If volume sufficient, do not move the slider. Shift it to the right side if volume low, and in left if high.
4. Remove a mark from the inscription "Allow Automatic Adjustment of the Microphone" if you use settings constantly. Now start setup of earphones. Check whether columns are connected. At setup of the microphone you had to hear some sound. If it was not, check whether columns are corrected, whether normal connection. Keep in mind that the plug of green color should be stuck in the connector of the same color.
5. Select in the block under the name "Loudspeakers" the device which is responsible for a sound output. Be very attentive as some sound cards separate a sound which goes on earphones or columns. You will select the gentle device.
6. Configure an outgoing sound in the same way, as well as microphone volume. Only remove from point under the name "Automatic Adjustment of Loudspeakers" a mark and click "OK".
7. Check whether everything is correct you made, having made a test call to contact with the login Echo.