Today it is possible to observe emergence of many programs for message exchange and also for creation of videoconferences. Among other programs it is always possible to select several leaders, for example, with Skype for which it is necessary to perform audio setting.
It is required to you
- Software of Skype.
Instruction
1. Find a label of start of the program on a desktop and left-click on it twice. In the opened window of user authentication enter the login and the password. After emergence of a main window of the program pass to audio settings, for this purpose click "Tools", select "Settings", then "Audio settings".
2. In the appeared window you can separately configure each device (microphone and earphones). For setup of the microphone it is necessary to check whether its plug is inserted into the respective slot on the system unit. When using laptops, as a rule, this action is not required — it is already built-in.
3. In the Microphone block select the device which you will use and tell several control phrases to expose the necessary volume. With a sufficient volume leave the slider on the place, otherwise it needs to be shifted to the right side with a low volume and in left at high.
4. For permanent storage of some settings it is necessary to remove a mark from the Allow Automatic Adjustment of the Microphone point. Now it is possible to start setup of loudspeakers (earphones).
5. First of all it is necessary to check whether columns are connected. If you heard a sound at setup of the microphone — this operation can be missed, otherwise check connection. By default to the plug of green color there corresponds the connector of the same color.
6. In the Loudspeakers block it is necessary to select the device which is responsible for a sound output. Here it is necessary to be extremely attentive since some sound cards are capable to separate the sound going on columns or earphones. Select the corresponding device and confirm the choice.
7. Configure an outgoing sound by analogy with setup of volume of the microphone, moving the slider to the necessary situation. Remove a mark from the Automatic Adjustment of Loudspeakers point and click "OK".
8. For fixing of result of setup check it by means of a test call to contact of Echo.