For creation of local area networks the specialists use modems, network hubs or routers which are important to be able for configuring competently for stable and fast work at the computer. Today the most significant and popular vendor of the network equipment is the D-Link company (D-Link) which proved in the market of creation and service of various local area networks.
Instruction
1. Select Wi-Fi the router. If you do not plan connection of a large number of devices to the equipment, it is possible to select simple, but not less qualitative budgetary model of the router.
2. Unpack the device and all completing materials. Look through the attached instruction. Connect power to the equipment.
3. Connect a cable of connection with the Internet to WAN entrance. Be attentive and in advance cope with provider on what means the Internet access is provided. If provision of services of the DSL Internet is used, it is important to buy beforehand the modem with DSL input.
4. Connect the network cable which goes complete with the device to one of the available four ports LAN. Connect other end of a cable to the network interface card of the computer or the laptop.
5. Turn on the computer, previously having configured the network interface card and having installed the corresponding drivers. Then turn on the equipment the button which is on the router Wi-fi case.
6. Open for any of the browsers which are available on your computer: Opera, Internet Explorer, Mozilla, etc. Enter the router IP address in an address bar. For the D-Link Dir-300 model which is recommended for getting for the house this address will be the following: 192.168.0.1. After information input in a separate window the menu of settings of the equipment will open.
7. Select in the Setup of Network menu. Pass to the choice of the data transfer protocol. Specify the login and the password and perform all subsequent operations for connection to the server of provider. All necessary data can be found in the contract which was signed with the supplier of Internet services in advance.
8. Pass to wireless network setup. Open the Wi-fi Setup menu. Set SSID (name) for the wireless access point.
Enter password (password) which will be required for access to this the most set point. Select necessary parameters from offered with which your wireless devices connected to the router of D-Link can work. Save all changes.
9. Reboot D-Link. For this purpose it is possible to use the power button or to disconnect the equipment from network for several seconds. Turn on the router. Connect necessary wireless devices to the access point configured by Wi-fi.