How to configure Beeline usb-modem

How to configure Beeline usb-modem

The USB modem Beeline is intended for Internet connection everywhere where there is a covering of network of mobile communication. This device supports data transmission by means of networks of generation of GSM and also 3G. Setup of such modem will take several minutes.


1. Buy the USB modem Beeline at any office of this operator. Together with the modem it will be necessary to sign the contract for provision of services mobileof Internet. This contract is similar to the contract for provision of services of mobile communication, and for its conclusion you will need the passport and the sum of money equal to a monthly license fee.

2. After acquisition insert the modem into the usb-port of the computer. Right after it software installation, the modem "sewed" in an internal memory will begin. In installation process on the computer the driver on the device and also a special application for work with a sim card proinstallirutsya. After the end of installation of software reboot, and then start the program by means of a label "the USB modem Beeline".

3. After start of the program the window control of the modem will open. Before the first Internet connection it is necessary to activate starting balance of the modem. For this purpose select the Management of the Account tab, in the left part of a window click the line "Activation of Starting Balance" and in the lower right corner of a window press the Activate button. After that check the balance. For this purpose in the left part of a window click the line "My Balance" and in the same lower right corner of a window press the Check Balance button. Wait for the reply of network and make sure that your balance is positive. After that it is possible to go on-line.

4. Before connection to the Internet learn whether there is your modem in a cover zone and what type of wireless communication is supported in this place. If the LED on the modem burns in red color – the signal of network is not accepted if green – the network supports data transmission of the EDGE standard. If the LED burns in blue color – the modem catches a signal 3G. For connection select the Connection tab and press the Connect button. In several seconds the modem will be connected to network, having accompanied it with a sound signal.

Author: «MirrorInfo» Dream Team