As access point of modern Wi-Fi of connections serves the router which will transform a signal from Ethernet wire to wireless. The Wi-fi setup is carried out by means of this router of wireless connection and by means of one of devices which supports data transmission on a communication link.
It is required to you
- The router for a wireless network.
Instruction
1. Connect the router to an Internet cable and an electrical network. Wait for start of the device and the corresponding icon on its panel of diodes. If the bulb of port to which the cable was connected lit up, the device means functions and you can continue setup of the Internet.
2. Connect the router to the computer through a wire or at once configure it by means of a wireless link. In the first case you will need to thrust a cable which went in one set with the device, to the corresponding slot of the computer. After that pass into "Network and Sharing Center" - "Management of adapter parameters". You can use this section, having selected the Start menu - "Control panel" or having clicked an icon of network with a left mouse button in Windows lower right corner.
3. Right-click on an icon "Wireless connection" and specify "Properties". Among the listed points of the General tab select a line "The internet protocol of IP v4" and click on the Properties button. In the corresponding blocks select automatic settings then click "Ok" and reboot.
4. To be connected to the interface of the router directly through a wireless network, in the list of the available Wi-fi nodes in a window of a system select the name of the adapter, click "Be connected".
5. Open a window of the browser and enter request 192.168.0.1. You will need to specify the login and the password for access to the program of setup. Enter the necessary data which can be specified in the instruction for application.
6. Being guided by documentation which is delivered in one set with the router and also having used data which to you were provided by provider when performing connection to the Internet, perform tuning of the router, moving on different menu items of pages in the browser. Do not forget to execute saving the entered data.
7. After performing settings you to be necessary to reboot the router. It will be possible to make it, having used the corresponding menu item of the control panel. After reset try to enter on any of Internet resources. If all settings are right, you will be connected to network.