Modern technologies allow to connect even desktop computers to wireless access points of Wi-fi. Unfortunately, existence of a certain equipment for this purpose is required.
It is required to you
- - Wi-Fi router;
- - 2 Wi-Fi of the adapter.
Instruction
1. If you decided to create own wireless network, then you will need Wi-Fi the router. For connection of desktop computers to Wi-Fi of network adapters recommend to use Wi-Fi. These devices happen two types: external and internal. Buy two adapters and the router.
2. Connect Wi-Fi the router to the power supply network. Connect to WAN port (Internet, DSL) this equipment a cable of connection to the Internet. Connect one of computers to LAN (Ethernet) port, using the network cable for implementation of this connection.
3. Open the instruction to Wi-Fi to the router and find in it the initial IP address of the device. If you have no instruction, then visit the official site of vendor of this model of the router and find out this value there.
4. Turn on the computer connected to Wi-Fi to the router. Open the browser and enter into its address bar IP devices for a login to the menu of settings.
5. Open the WAN menu (setup of network). Change parameters of this menu. At introduction of the required values use a professional advice of technical support of provider.
6. Open the Wireless Settings menu (Wi-fi Setup). Create Wi-Fi access point, having entered her name (SSID), the password (password) and having specified types of safety and a radio channel. Save the changed settings. Reboot Wi-Fi the router.
7. Connect Wi-Fi the adapter to the second computer. Install the software and drivers for this equipment. Activate search of wireless networks. Be connected to the access point created by you.
8. Disconnect the first computer from the router. Repeat the algorithm described in the previous step, configuring this computer.