Integration of SP3 service into the Windows operating system is made in four stages. In the beginning preparation of necessary data is executed then files of a boot image and direct integration are extracted, and the boot drive is created in the end.
It is required to you
- - Windows setup disk;
- - SP3 service.
Instruction
1. Press the Start-up button to open the main menu of the Windows operating system. Pass into the section "Control panel", press the Arrange button and select the Properties of the Folder item. Open the View tab and check near the Show the Hidden Files and Folders point. Click "Ok" to apply the made changes.
2. Create two folders in any place. One is intended for the copy of the setup disk of the Windows operating system, in the second it is necessary to copy SP3 archive. It should be noted that the name of folders should be specified only in Latin. After that open the main menu "Start-up" and start the Execute command to execute extraction of the file.
3. Specify in the field the Execute commands path to the SP3 kb936929-sp3-x86-enu.exe file which needs to be extracted. At the same time the name of the file should correspond to the installed version of the operating system. Click "Open" to start unpacking of the selected file. After completion of operation delete archive from the created folder.
4. Insert the setup disk into the computer disk drive. State in the command line the address to the cdimage.iso file located on a disk. Click input. The image of the specified disk which place in the second folder will be as a result created.
5. Integrate SP3 service with the operating system. For this purpose enter in the command line the following text "_imya a disk _: / _ a folder name with sp3_/i386/update/update.exe/integrate: _imya disk _: / _ a folder name with OS _". Click input.
6. Install any program on unpackings of images. For example, it is possible to use the Nero Burning ROM application. Start it and choose the Create the Loaded CD command. Open the Boot tab and note the line Image File. Click on the Browse button and specify path to the image file. Confirm command execution and wait for the end of record of a disk.