How to make the electric motor in Maynkraft

How to make the electric motor in Maynkraft

Digital Hits: 80

Many gamers seek and to surround in Minecraft themselves with usual things in normal life. For this purpose they create in a game not only the houses equipped with modern household appliances and furniture but also different mechanisms. In some of them the electric motor which needs to be created too is used.

Creation of the electric motor in Forestry



It is important to make the reservation at once: the krafting of the electric motor without special spendthrifts is impossible. One of the modifications suitable those who are eager to create mechanisms with such engine - Forestry. However, as this of modes is let out as addition to Industrial Craft2, it will not work without that. It is also desirable to proinstallirovat also BuildCraft - then will become available much more different materials and recipes of craft.


To skraftit the engine in Forestry, it is necessary to collect resources necessary for this purpose at first. First of all the tin ingots received in the furnace after melting of the corresponding ore are required. The last is got at the height of 16-91 block from an adminium (radical breed) and meets quite often - to ten-eighteen fields on chank. It looks as a normal stone with light gray impregnations.

 

Tin ingots - together with copper - will be required also for a gear wheel krafting from this metal. For this purpose they need to be placed on a workbench in the form of a cross: so that the ingot of copper was on the center, and corners - empty. However, if it was installed also BuildCraft modes, there will be available a bit different recipe of creation of a tin gear wheel. In it everything is done the same approximately, but instead of a copper ingot the stone gear will be used.

Craft of an electric motor requires also glass. It is produced to famous many experienced gamers in the way - by overfiring of blocks of sand in the furnace. Skilled players for certain know also the recipe of creation of one more element, necessary for the engine, - the piston. For this purpose in the center of a workbench the iron ingot, under it - red dust, on each side from them - four cobble-stones, and on top - three blocks of boards is installed.

Now it was necessary to collect all details on the machine. In its top horizontal row it is necessary to put three ingots of tin, in the center - the glass block, under it - the piston, on each side from which two tin gear wheels will be placed. The electric motor which turned out after similar manipulations can be charged on wires or just to put for this purpose in it a red power crystal or the accumulator.

Electric motor in Universal Electricity



Forestry - not only modes with which creation of the engine working at electricity is possible. The same option is available also with Universal Electricity. Here electric motors are used in a krafting of different machines which for work needs electromagnets.

Creation of the engine of the above-stated type requires three different resources - iron and steel ingots and also a copper wire. It is the most difficult to make the last. It is made of three copper ingots and six blocks of wool or pieces of skin.

Ingots turn out in the traditional way - when melting the corresponding ore. For the same to get wool, it will be necessary to kill or cut scissors a sheep, and receiving skin will require killing of cows or horses. Copper ingots should be put in an average vertical row of a workbench, and on each side from them - any of two above-mentioned resources. As a result of one such craft operation there will be six copper wires, and it is enough for two electric motors.

Steel ingot can be received if to melt dust of this metal into furnaces. The last is made of absolutely simple resources - an iron ingot and four pieces of coal. The first should be put in the center of a workbench, and the second - to arrange a cross around it (that angular slots of the machine remained not busy).

Now it is necessary to assemble the electric motor. For this purpose it is necessary to install on workbench corners four copper wires, in the center - an iron ingot, and in other cells - steel.

Author: «MirrorInfo» Dream Team

Print