Purpose of the surge protector is to protect loading from bumps of network and noises and also to prevent hit in network of the noises created by the loading. Such device consists of induksivny, capacitive and non-linear elements.
Instruction
1. As a basis for the filter use the normal extender with grounding. It should not have the switch. Make sure that the extender is deenergized. Actually the filter together with the switch arrange in the separate plastic case between a fork and the extender.
2. Take the bipolar switch designed for mains voltage and current which will be consumed from the filter. Connect one of network wires to a switch entrance via the safety lock on 10 A, another - directly.
3. Open the damaged computer power supply which was not turned on in network by more than two weeks. Remove from it a payment then accurately to a vypayayta a special two-winding throttle (do not mix it with the transformer!) which is located directly on input (sometimes on a payment, sometimes separately). It has two input and two output outputs. Each of input outputs is connected to corresponding to it day off through a winding. Attach one output pin of the switch to one input pin of the filter, another - to another.
4. Buy the special trekhvyvodny discharger which is specially designed for use in surge protectors on 220 V. Podklyuchita one of its side outputs to one input pin of a two-winding throttle another - to another. Carry out connection surely after the safety lock and the switch! Connect an average output of the discharger to a grounding wire.
5. Connect each of output outputs of a two-winding throttle to the network wire of the extender corresponding to it. Connect the grounding wire of the extender directly to a grounding wire of a fork. Make both grounding wires is longer than the others that if for a cord it is accidentally pulled, they came off the last.
6. Ring out an input and an output of the device to make sure of lack of short circuits, irrespective of switch position. Carefully insulate all connections. Only after it turn on the filter in network and connect to it loading. Its power should not exceed valid for a two-winding throttle.