After purchase and unpacking of the Nintendo Wii prefix to start a game you will need to make connection and to make some settings via its interface. The prefix can be connected to the TV. Also you will need to install correctly Sensor Bar which is responsible for recognition of movements of the player. Only after the correct installation you will be able to enjoy process of a game on the console.
It is required to you
- - set of the Nintendo Wii prefix;
- - disk with a game.
Instruction
1. At first install Sensor Bar about the TV. This part of a prefix is responsible for reception of a signal from the control panel and other wireless elements of the interface. Sensor Bar is desirable to arrange in the middle of the TV screen. Also it can be installed on a special support which goes in one set with the console.
2. Connect a wire which goes from Sensor Bar, to a prefix to the connector of the same name on the back panel of the device. After connection of Sensor Bar pass to the procedure of connection of Nintendo Wii to the TV.
3. For implementation of image output from the console on the TV the composite cable which also goes in a set together with a prefix is used. Insert one end of a wire into the corresponding connector on the device. Install other end in the composite slot of the TV according to the instruction for application.
4. Connect Nintendo Wii to the socket and press the inclusion button which should light up in red color. Open the front panel of a compartment of the memory card and install the USB stick. It will allow you to save progress in games.
5. Press the button of inclusion and wait for emergence of a welcome screen to a prefix. Click on the Sync button on each of devices (on the prefix and the control panel) and wait for definition of the connected control of remote access on the screen. Now you can use the remote controller for the choice of menu items of the console.
6. Install a disk with a game in a prefix and wait for emergence of the control menu a game. Direct the control panel to the TV and press button A for the choice of a disk in the screen upper left corner. Click the Start key. Being guided by instructions and icons on the screen, begin process of a game.
7. System settings of Wii are available on clicking of the button of the same name in the left lower part of the TV. Select Date Management for setup of date and time and Wii Settings for a control setting for the console. According to the instruction to a prefix configure each menu item and save the made changes.