The R-Studio program is intended for deleted data recovery and information which was lost as a result of damage or formatting of a system of files. The program complex is compatible in work with hard drives, memory cards, flash cards and other media of files and also with RAIDs. It can deal with how the R-Studio program works even to the uncertain PC user.
It is required to you
- Computer, program software of R-Studio, removable medium, Internet.
Instruction
1. If you have a setup disk for this program, insert it into the disk drive and wait for automatic start. If you downloaded a program complex from the Internet, then having installed the program, safely get to work with it. By the way, you can get acquainted with how to use R-Studio by means of video of lessons which in free access are in Internet space. Attentively study everything that is told you by the program. Hasty actions can be worth a lot to you!
2. Start the R-Studio program and study its disk panel, on it all devices connected to the computer and also the complete information about them will be displayed. You will select the media from which files were deleted and which requires further recovery. If the media is not displayed, look narrowly at USB slots: do not forget to connect USB sticks or removable hard drives to the computer, make sure that the computer sees them in principle.
3. Create a disk image and connect further actions only with it, it will help to save the existing files or to avoid their damages. Be careful and attentive, the program though simple in use, but rash and hasty actions can result in sad results. Pay attention that on your PC there has to be a necessary free memory size. It is necessary that it was equal to the volume of data which is on the media and require recovery.
4. Click "Create an image". This button is in the upper right corner. It is necessary to specify storage location of this image in a window which will open before you. Upon completion of creation of an image pass to a main window and the Open an Image button. Specify path to the created file.
5. Start scanning of a disk. Click "Scan", further – "In addition" and select scanning type. This type depends on the volume of the device which needs to be checked. If it is the small media, select "A detailed view", so the program will display the section table and all information on the found files. When checking the hard drive select "A simple view", so check will take place quicker. Press "Scan" and expect results.
6. Upon termination of check before you the list of the found files which you can restore either completely will open, or it is selective. Specify the place where it is worth saving the restored files and again expect result, transfer of the selected files will take a lot of time.