How to iron polyester

How to iron polyester

At the correct garment care of a product from polyester it is possible not to iron at all. The correct leaving first of all means washing at which the product isn't deformed. Polyester needs to be erased at water temperature not higher than 40 °, manually or in the washing machine. From more hot water on material wrinkles and folds of which it is necessary to get rid are formed.

It is required to you

  • - iron;
  • - gauze or cotton fabric;
  • - water.

Instruction

1. To put the wrinkled polyester in order, use the iron with the regulator. Among modern irons it is very difficult to find such on which it is impossible to establish the necessary temperature. But as old primitive irons practically don't fail, it is quite probable that you have it and, and even someone from house uses it. The antiquarian iron is suitable and in this case, but isn't really convenient.

2. Dip a product into a basin with cold water. Let's it dry out a little. Remember that polyester dries very quickly. Fabric has to remain a little damp. If a thing rather new, you quite could have rag which was applied to it. It makes sense to keep such rags because over them it is possible to make experiments, without being afraid to damage an article of clothing. In this case you need to experiment a little with an iron temperature. It has to be slightly higher, than that at which you usually iron clothes from synthetic fabrics.

3. For the wrinkled polyester establish the same temperature, as for silk. At such position of the regulator it is possible to iron absolutely quietly, without being afraid that fabric will melt. However at such temperature of a fold can not be smoothed. Slightly turn the regulator. Try to iron a rag. If it is absent, then iron some hardly noticeable place on the product. It can be, for example, filing, an internal part of a cuff or a bottom of a turn-down collar. As a rule, folds at higher, than usually, temperature are perfectly smoothed. It is recommended to iron through fine fabric, like a gauze.

4. Need to iron a product can arise and in case you want it to look especially elegantly. For example, you gather for a ball. Perfectly ironed out clothes not only well look, but also create mood. It isn't necessary to apply any special tricks. Put the regulator in the silk mode and iron a product through a gauze layer.

5. If after all at your disposal there was an antiquarian iron, then and it is necessary to iron in the grandmother's way. Heat the iron Try it on a rag and switch off. It cools down not really quickly therefore you will manage to iron a product from synthetics. Iron it on the face through cotton fabric.

Author: «MirrorInfo» Dream Team


Print