Ethyl alcohol – powerful fuel. Because of the high content of alcohol it is difficult to receive it, without having special sources. If to do ethyl alcohol independently, it is possible to make unlimited number of fuel. That to make it, you need to turn house utensils into the fermenting and distilling equipment as was at the time of distribution of the home distilling devices.
Distillation device
1. Wrap up a copper tube around a 3.5-liter glass bottle from under milk on a spiral, having left a large supply of a tube on each side. Pull out a bottle from the tube twirled by a spiral when you wrap up it 9-10 times.
2. Attach one end of a tube to pressure cooker top by means of a stopper. It can be got in a collection of wines or in any place where tools for winemaking are on sale.
3. Drill an opening at the bottom of a 38-liter plastic bucket.
4. Pass the end of a tube opposite to that which is attached to the pressure cooker, through an opening at the bottom of a bucket and place a spiral in a bucket.
5. Seal edges of the tube which is passed through a bucket bottom, quick-drying silicone putty. Let's putty dry out well before beginning distillation process.
Fermentation
1. Fill approximately on a third a big barrel with old fruit.
2. Saturate with air and mash fruit a pitchfork or a scapula. The purpose is in mashing fruit to consistence of komkovaty puree.
3. Add 1 or 2 packs of yeast, suitable for ethyl alcohol, to a barrel with the mashed fruit. Yeast can be bought in vinogradarsky economy or in shop for wine makers.
4. Cover from above a barrel, but it isn't dense. If to close densely, it will be filled with gases and can blow up or leak.
5. Let's fruit infuse and perebrodit with yeast approximately within one and a half weeks. At this time yeast completely will process the glucose which is contained in fruit.
Distillation
1. Add a little mix from the mashed fruit to the pressure cooker and bring to the boil.
2. Add to an ice bucket that it completely covered a copper spiral tube.
Collect the ethyl alcohol dripping from the end of the copper tube passed through a bucket bottom in some capacity.