Warming of bath or sauna – process rather difficult. For various parts of construction different methods are used that is caused by its design features and influence of the microclimate created in use.
It is required to you
- - mineral mats;
- - haydite or slag;
- - mezhventsovy jute heater;
- - foil;
- - kraft paper;
- - clay;
- - perlite, sawdust or peat;
- - aramitex and izoltex;
- - clay.
Instruction
1. The purpose of warming of bath is ensuring fast warming up of the room, long deduction of heat and, as a result, more economic consumption of energy or firewood. In use absolutely special microclimate is indoors created. Therefore walls of bath have to be warmer, than, for example, in premises. Also ensuring vapor barrier is necessary. But, at all this, impregnation by the chemical compositions is undesirable.
2. Warm base top mineral mats. Before laying of floor under it fill up soil with haydite or slag the layer exceeding thickness of walls by 1.5-2 times. Warming of walls begins even in the course of assembly of felling. Between logs stack fibrous materials. Use mezhventsovy jute heater for this purpose. It is the modern, eco-friendly and not giving in to rotting material. After construction of roof carefully to prokonopatta grooves and gaps from within and outside.
3. Most often penopolistirola are applied to heat insulation of walls. In interval between internal covering and wall the paroizodyation becomes. For washing office and sweating room use foil, for the recreation room – kraft paper.
4. For protection of wood structures of roof against steam cover them with clay mix with sawdust. Layer thickness - the 1-2nd. Fill up ceiling with perlite, peat or sawdust. For vapor barrier use subroofing materials aramitex and izoltex. The first is mounted under covering inside, and the second over isolation outside.
5. Very large amount of heat is lost at insufficiently good thermal insulation of windows. At construction consider that it is possible to reduce heatlosses due to their lowest arrangement. Frames have to be carefully driven to covers. Glasses - to correspond to the size of frames and to be fixed carefully. For bath use double or triple glazing or establish double-glazed windows. Also make doors in sweating room low. Densely drive that there were no slots.