Cutting of pear is very important action. It needs to be seen off regularly. Then the harvest will always be big. But it is important to know, how exactly it is necessary to do cutting of pear. If it is wrong to execute it, then it will be already impossible to expect high fruitfulness of tree.
Cutting needs to be carried out in the early spring when on branches kidneys have not appeared yet. Such procedure will allow to make tree fructifying. It is impossible to carry out it in the summer as because part of leaves will be removed, the tree will not be able to receive necessary power supply. If to execute cutting in the fall, then places of cuts will remain sensitive and will not manage to begin to live that will lead to freezing of tree.
How it is correct to make cutting of pear?
For cutting it is necessary to prepare secateurs in advance. It is necessary to use it correctly. It is required that the tool has been turned by narrow edge to that part of branch which needs to be removed. When carrying out the first cutting it is required to truncate at first on quarter part of trunk which is from the lower branch to top. Such approach will allow to appear on tree to large number of kidneys. In the future the tree will have branched crown.
You should not believe that because of removal of large number of branches the tree will not bring desirable harvest. Of course, some kidneys will be cut off, but on pear will lag behind still them in enough. Besides, having removed them partially, it will be possible to receive quality pears. You should not forget also what the tree which is not overloaded with harvest endures winter much better. The next year it is necessary to execute cutting too. It will be required to truncate krone branches on 25-30 cm. At the same time it is necessary to watch that near tree shoots did not appear. They are removed directly at the root. The stump from them should not remain.
Councils for cutting of pear
In order that during cutting there was no edge fin of bark, delete with secateurs at first the branches located from below, and then undertake that are above. If it is required to cut off heavy branch, then do it gradually. First of all file it from below – approximately at distance of 30 cm from the basis. Then begin to cut branch from above. As a result of it it under force of the weight will break off. Then do not forget to remove the rest on ring. During cutting of branches try to do cuts equal and as it is possible smaller diameter. You should not allow availability of facets (wood curves). At once cover places of cuts with paint which part drying oil, or the garden thief is. If not to make it, then during the beginning of sokodvizheniye pear "will begin to cry", it will begin to weaken it and will draw attention of mean insects.