Work with the chainsaw is quite dangerous, its wrong use can lead to injuries. Before using this tool, it is necessary to study it, to get acquainted with safety precautions and rules of work.
Workplace
Before starting works, examine the area on which these works will be performed. It is important to create conditions under which use of the chainsaw will be the safest. For example, if you saw trees, pay attention to that nearby there were no power lines, close standing machines, buildings and other obstacles. You have to avoid falling of trees on these objects.
Types of works
By means of the chainsaw four main types of works, as a rule, are carried out:
Cabin of trees. Consists in simple cutting by the chainsaw of separate trees, this procedure demands special safety precautions since the falling trees can constitute serious danger. Cutting of boughs on tree. It can be made as to and after the tree is cut. Undercutting of bushes and trees. It is carried out for the purpose of their dressing.
Processing. It is made, for example, for production on tree trunk of various dredging. All these works demands certain safety precautions, surely read the operating manual of the chainsaw, in it the complete description of these measures is provided.
Preparation and check
Prepare mix for filling of the chainsaw and fill in it. For production of such mix it is necessary to mix 4 liters of gasoline and about 150 grams of engine oil. The engine of the chainsaw has no separate feed system of oil if not to use the correct fuel, it can burn down. Make sure of operability of the chainsaw, check whether the chain brake allowing to stop instantly work is serviceable.
Work
If you for the first time use the chainsaw, choose the most comfortable site of tree for practice. Bring saw blade to the place in which you intend to saw, disconnect chain brake, squeeze out throttle against the stop and apply cloth to surface. You do not press too strongly, do it moderately, often there is enough weight of the cloth. The chainsaw has to work at maximum speed before completion of work, weaken throttle, only when the cloth begins to leave on the other side of log, otherwise it can get stuck.
Completion of works and storage
Having finished performance of work, the chainsaw needs to be prepared for storage. First of all pour out fuel reserves of fuel tank, it is necessary to prevent possible leak of flammable mix. After that start the engine last time to devastate the carburetor. You store the chainsaw in the dry place, cover it at the same time with some material.