It is simple to buy ready bathtub from cast iron, acrylic, other materials and to establish it in the bathroom. But sometimes situations demand that there was bathtub of certain oversize or form. Or there is desire to embody the special design ideas in production of bathing capacity.
1. The simplest option is to organize quickly the bathing capacity when it is necessary to be washed up urgently, for example, at the dacha. Lay any big capacity (box, box from tree, plastic) thick polyethylene material. Summer residents buy such material for covering of greenhouses. The fast bathtub is ready. Polyethylene can also be laid in the hole dug in the earth and to fill it with water. There will be semblance of the "lazy" pool.
2. The following method of production of bathtub the hands longer, but materials it requests very little. Impose pallet of any form with brick. Increase brick walls above pallet so as far as you need on height bathtub. Such bathtub will have natural discharge. The opening in pallet needs to be removed with corrugated pipe in sewerage system of the house. Revet walls of ready bathtub at will with ceramic tile.
3. Make the hands bathtub of narrow modules of timbering which should not be removed after. The timbering has to be in that case from metal. Fill in the prepared form with concrete solution. When concrete dries, revet bathtub with water-proof materials, for example tile, mosaic, waterproof plastic.
4. Vann can make of red refractory brick which should be stuck together among themselves waterproof glue (tserazity). Such glue is applied to arrangement of pools. Then make two layers of waterproofing material in bathtub, having allowed to dry at the same time to layers. For decorative effect impose ready bathtub with mosaic or other moisture resistant material.
5. This option the most difficult for production of bathing special form or the size, but in such way it is possible to embody the most extraordinary design tasks. Make template of future bathroom of cardboard full-scale. On it (by means of experts) it is necessary to weld framework from metal. The bowl of the bathroom is made of thin steel sheets. They can be bent under the necessary corner, to give them the special forms. All design from sheets and framework is established on the place of future finding of the bathroom.
6. Then in design the concrete resisting to moisture is filled in. When it dries, put the first layer of waterproofing material, allow it to dry. Then two more with systematic drying. The design is checked for leak, pouring in it water for 1-2 days. If everything is all right, the bathtub is finished as envisioned by the designer. Best of all are suitable ceramic mosaic in the form of sea stones or tile for finishing of such bathroom. Thus it is possible to make in owner-occupied dwelling even the small pool.