Not each Russian inhabitant can brag of availability of the conditioner at himself in the house. At the same time many people do not despond about it at all. The benefit, there is set of other ways to be cooled. For example, if it becomes absolutely intolerable from summer heat, it is possible to make the simple conditioner with own hands from the normal fan and plastic bottles.
It is required to you
- - fan;
- - plastic bottles;
- - copper tube or hose.
Instruction
1. For creation of the self-made conditioner it is possible to use except plastic bottles glass or cans of beer drink. Arrange several bottles in which it is in advance necessary to pour cold water or to fill with ice, in one row, doing between them gap in two centimeters. It is necessary for air flow. Behind bottle row put the fan and include it in the socket. Do not forget to change water and ice from time to time in bottles as it quickly heats up. Such way most of all will be suitable for the small room.
2. The conditioner can be manufactured of hose or copper tube. This model can be used in apartments of the average sizes. Reel up tube or hose on protective screen of the ventilatory equipment so that there were no strong bends. As a result something similar has to turn out on the radiator device.
3. Fix one end of copper tube on the mixer, and lower another in sink or bathtub then fix the device the received situation. Open the crane with cold water and turn on the fan. Air flow can be sent to any party. The main thing, pressure of water should not be strong.
4. There is also even more advanced conditioner. Two two-liter and three half liter bottles, foam tape and the fan will be necessary for its creation.
5. At bottles of the big size cut off the lower parts and make in them openings, in one of them at the bottom, in another sideways. Wind the fan with foam rubber and place it between two cut-off bottoms so that from below there was bottom in which the opening is made sideways.
6. Take two covers and cut off at them bottoms, and on sides of two small bottles cut opening which size has to correspond to neck. In the received opening push neck of big bottle without bottom then fix design by cover. In the same way fix the second half liter container to small bottle.
7. On design with the fan install the bottle of 0.5 l filled with ice and cover it with big bottle then the conditioner can be considered ready.