Because base of wooden house not such massive, as base of stone; and thickness of walls small - arises need for additional warming of this part of the house.
Instruction
1. Carrying out any construction jobs, including warmings of the base of wooden house, includes number of obligatory actions. First of all it is necessary to carry out cleaning of surface of the base of the earth and vegetation.
2. Works on warming are inseparably linked with waterproofing and primer. As waterproofing material liquid rubber, bituminous mastics, rolled materials can be used. If rolled heaters are applied to warming of the base, then they should be warmed and already then to fix to the base. With liquid rubber everything is much simpler: bucket contents with material carefully mix up and by means of the palette are applied on the base. Also as waterproofing roofing material is used.
3. Depending on way of waterproofing the warming option is chosen. As the base in itself has no insulating properties, it can be chilled therefore it is necessary to carry out warming by one of ways: expanded polystyrene, earth, haydite. Warming by the earth is carried out for such houses which are under construction in climatic areas where there are no hard frosts. For warming by haydite around the base the wood form which is filled with this heater is under construction.
4. Let's stop on the most widespread way of warming by means of expanded polystyrene. This way is reasonable when it is necessary to find rather inexpensive solution. But at the same time it is very important to observe the sequence of works: - works on warming of the base are carried out to dry warm weather; - at the first stage it is necessary to dig on all perimeter of the building superficial trench - trench depth about 50 cm, and width - 1-1.5 m; - sand is fallen asleep for bottom of trench and carefully stamped, plates from expanded polystyrene keep within sand under small bias; - expanded polystyrene fastens to waterproofing course by means of special bituminous mastics; - it is necessary to know that organic solvents should not be part of adhesive substances. Process of warming can be carried out as in the horizontal, and vertical direction. At horizontal way the sheets of expanded polystyrene keep within ditch and at the end are filled in with concrete. If you have decided to warm the base by means of polyurethane foam independently, then process will be comes down to normal sputtering of material on the basis.