Regiments from gypsum cardboard have to have framework structure which can even correct the room in basis. If you are going to have on shelves massive objects, it is necessary to use sheets which thickness is equal to 1.8 cm.
Regiments from gypsum cardboard will help to distribute indoors objects more rationally and if to equip regiments in the form of partitions, then it will correct the room under your preferences. To make the shelf of HL, it is necessary to mount framework which forms niche. Further the framework should be sheathed sheets, and if necessary it is possible to issue thus all wall that will help also to level it quickly. Production of design of hinged type should be equipped with separate framework, having applied profile with section in 50×25 mm.
The first stage assumes carrying out marking on wall surface in the course of what it is necessary to use level. In points where it is supposed to install fixture, it is necessary to make openings the perforator. If on regiment you intend to establish heavy objects, then it is necessary to use sheets from 1.8 cm, as fixture it is necessary to use screws butterflies, fixing profiles to wall fixture with more frequent step. Frames and traverses will allow to make design of more reliable.
Manufacturing techniques of shelves
On wall on marking it is necessary to strengthen profiles to which it is necessary to record slide guides, they will allow to receive volume design. Further it is possible to pass to process of covering. If it is supposed to equip the shelf with dot lamps, fire safety regulations provide mounting of cable in crepe paper. To receive equal edges of HL, their faces should be subjected to processing nazhdachky. Gypsum cardboard it is necessary to fix to furring with use of self-tapping screws.
Processing of shelves
It is necessary to apply plaster putty on the received joints, and after to protect them serpyanka. One more layer of putty has to go the following. If in work you have decided to apply armoring lattice, then it is necessary to proshpaklevat all surface of leaf. It is necessary to wait when foundation of the shelf dries, only then it is possible to start processing of surface finishing putty. Corners of product can be improved fastening of angle sections, using at the same time primer. The similar accessories can have galvanized steel, plastic or aluminum in basis. If you wish to execute the regiments, most resistant to external mechanical influences, then it is necessary to apply steel corners. But metal is subject to corrosion therefore it is not recommended to establish such protection in rooms with humid environment.