The electrofret saw is tool which has the universal cutting potential. Use it for cutting of tree, different types of plastic, gypsum cardboard, non-ferrous metals, ceramic tile and other materials.
What it is necessary to pay attention upon purchase of the electrofret saw to
Choosing the electric fret saw for private use and work of the house, it is necessary to pay attention to the following parameters: power, adjustment of speed of turns, mechanism of the pendular course, way of fastening of file, connection to the vacuum cleaner.
Power of the tool influences work performance speed, material also depends on it what thickness it is possible to subject to cut. Optimum power for the household electrofret saw – 800-900 W. It gives the chance to work effectively with various materials.
One more important criterion on which the quality of work – adjustment of speed of turns depends. Each material requires certain speed. For example, to cut plasticity of turns it is necessary much less, than for metal or tree. Availability of the mechanism of the pendular course in the electrofret saw will allow you to carry out work not only vertical, but also horizontal movements. Thanks to this function the area and accuracy of cut increases.
The dull file should be changed at once not to load the engine.
The file can fasten to the tool by means of special key that will demand extra time. Other option – fastening by means of the special holder who allows to change easily and quickly files.
To cut circles, buy the tool equipped with the device of turn of file.
Tool possible connection to the vacuum cleaner allows to keep clean workplace and in due time to delete noxious to health dust. For connection the special branch pipe is used if this function is important for you, check its availability in advance.
Features of stable operation of the tool
Buying the fret saw, turn on it without file and put on working surface. If the tool remains on the place and will not move because of vibration, so it is well assembled and it will be convenient to work with it. If the fret saw strongly vibrates, then during the work the file will begin to leave aside.
The model allows to work with the built-in small lamp at bad lighting.
Other parameter which affects stability of file it is arrangement of the lower basic roller. The it will be closer to the platform, the better. The platform (sole) has to be cast aluminum, at such production it turns out ideally equal that is not always achievable in case with steel stamping.