Reliable protection of the territory – here that is required from fences first of all. It is welcomed also if the protection beautifully looks. For achievement of good results before mounting works it is necessary not just to imagine that it would be desirable to receive as a result, but also to execute the drawing or the sketch.
By preparation for the fence device from professional flooring around the site at first it is desirable to define what have to be thickness, height, exterior of design. Stages of construction of fence and its durability will depend on the choice of these components.
Before carrying out installation, it is necessary to define load of future fence and to consider what soil on this place. It is better to concrete columns, especially when the fence is supposed to make from two meters high and more.
If in addition to big height the fence is also established in such area where there are a little buildings and various plantings which can constrain wind gusts the additional strengthening is required. Most often for this purpose flood the base – at the monolithic basis the protection will stay long enough.
For works with the basis it is desirable to arrange with the first layer pillow from sand and gravel. It will secure design against annual motions during the defrostings and zamerzaniye of soil.
For columns generally choose the pro-thinned-out pipe which has section of 60Х60 mm. Installation of columns is made with step by 2-3 meters. At high rigidity of professional flooring and columns this distance can be done more. They are established to the soil on depth at least 80 cm.
For connection of columns it is possible to use the pro-thinned-out pipes with the section of 20Х40 mm. Attach them by means of electric welding or specially made fastenings.
First of all establish the first and last columns for one party of fence. Between them pull tape – the so-called lighthouse on which expose also the subsequent. When this stage is ended, mounting of professional leaf on the prepared and strengthened columns begins. For fastening use revetings or self-tapping screws.
At the good flat site where there is such opportunity, it is better to strengthen professional flooring to one line. If the site has inclination, sections are attached with certain step which height will depend on site inclination level.