All who at least once in life faced repair works indoors have general idea of what is putty. Without this material for finishing it is difficult to achieve ideal smoothness of surfaces. The ability to handle this material allows to prepare walls most successfully.
Not to be mistaken with the choice at acquisition, it is necessary to know the answer to question not only about that why the putty, but also about what it happens types is necessary. The putty represents structure of pastelike consistence which it is possible to take in finished form or to receive as a result of mixing of dry mixes. Purpose of putty in surface preparation of walls to finishing finishing. If walls are rough, then it will affect their exterior after painting or gluing of wall-paper. Roughnesses will be appeared through even paper layer. Difference of putty from plaster that the last is imposed by thicker layer and is used when at surface there are too expressed defects needing alignment. The putty is put after plaster with the layer which is not exceeding 5 mm it dries quickly enough, is rubbed clean small abrasive paper to smoothness, doing surface ideally plain. Mix is applied to alignment of any surfaces: walls, ceilings, gipsokartonovy designs. Depending on structure, dry blends are plaster, cement, polymeric, limy. The ready putty is more convenient as it does not demand additional mixing, but by production of heavy repair is economically not favorable. On the purpose the putty for walls is subdivided into leveling and finishing. For the leveling mix the thickest layer of drawing is admissible, up to 5 mm, without cracking and stratification. Such putty successfully hides all defects of the basis, but needs the subsequent finishing covering. The finishing putty consists of fine elements which after drying form absolutely smooth surface. Depending on what finishing work is planned subsequently, the similar putty is adapted for painting, under sticker of wall-paper and universal. The last is most convenient as it is combined with any kind of finishing materials.