Assembly and installation of kitchen – fascinating and simple business. The main thing is to perform works step by step. As furniture is collected, it is possible to put into place tables and to hang shelves.
Instruction
1. After to you have brought the order, read inscriptions on boxes or ask the forwarding agent to show in what any given elements of kitchen lie. If there are glass spare parts, then surely check their integrity. If you in the presence of the forwarding agent open boxes to make sure in availability of all components, then do not mix what parts lay in what.
2. Before establishing kitchen it is necessary to bring together it. Do not undertake at once the shelf which consists of several decorative elements, begin about idle time.
3. It is good if the scheme is attached, but it is frequent it not really detailed and to understand to the beginning collector it not easy. Open one box (if have not made it earlier). Look what there parts. Normally it: 2 sidewalls, bottom and doors. The top of tables in the form of table-top is delivered in separate packing. At shelves it is present.
4. Arrange bottom of kitchen table or shelf horizontally and place on it one of sidewalls. If you have picked up these parts correctly, then establish bottom vertically and sidewall – also. Combine cuts of these two parts and connect them by means of euroscrews which lies among iron spare parts and accessories.
5. In the same way attach the second side. Usually ahead of table (below) there is low rectangular decorative panel. Too attach it to the lower parts of sidewalls, and above connect them by means of two dostochek which go in set to this table too. If it is shelf, then attach top to sidewalls.
6. By means of tape measure measure diagonals of back wall. If digits have turned out different, then level part. Now beat by means of small nails on back wall face side inside veneer sheet.
7. Screws attach one part of latching mechanisms to two round dredging of each of two doors. Attach the second part to sidewalls of locker or shelf. By means of the screw-driver level doors, adjusting two screws of mechanisms.
8. Establish in design, and from above put in specially available openings, iron shelf-holders on them regiments. Establish kitchen furniture as you planned it. From above on tables put table-top. On washing – sink. Attach to it draining, and to its top opening – the crane. Between table-top and wall attach ornamental strips that there were no gaps.
9. Hang up regiments. For this purpose drill opening in wall, hammer into it in dowel and twirl in it the self-tapping screw.