Summer shower at the dacha - very convenient and economic opportunity to take shower in warm water, without spending electricity for its heating. Still such design is convenient as it can be built from improvised materials absolutely cheap. How? Read in this overview.
Whether it is necessary to speak about advantages of shower at the dacha? It both hygiene, and way to relax after work, and just pleasure, opportunity to be refreshed during summer heat. The design of summer shower can be made of such materials:
- metalprofile;
- tree;
- polycarbonate;
It is not the complete list as there are handymen who construct design from polypropylene pipes, glass and other materials. About everything one after another.
Before starting the device of shower cabin, it is necessary to prepare the place and materials carefully. Tools and consumables will be necessary.
The correct placement of design will allow to spend most economically available resources. So, choose site in the following parameters:
- the open place without shadow (not to be spent for water heating, it can heat up from the sun);
- there has to be small eminence;
- whenever possible near communications (water supply system).
Also gardeners often are guided by such place not to drain soapsuds on beds cultural plants.
Generalizing classification of types shower for giving, it is possible to separate them on:
- Figurative (lungs folding) designs;
- Stationary (capital lodges on the base, make of polycarbonate, brick and so forth);
- Frame (without construction of strong walls).
Choose the option suitable for you and plan material consumption.
That acceptance of shower brought pleasure, it is necessary to provide such dimensions of cabin that in it it was possible to bend, turn freely, simply to stand.
On average, be guided by such scales:
- Height is from 2 meters up to 3;
- Width is not less than 1.4 meters;
- Length is about 1.5 - 2 meters.
If you want to equip locker room, then length 1.8-2 m will be optimum.
!! At marking on materials consider that at the expense of the wall thickness and partitions the internal space will be less rated.
It is required:
- Tank with the crane;
- Shower nozzle;
- Watering hose;
- 4 beams for design support;
- Material for fastening of design and creation of stiffening fins;
- Film, oilcloth (for walls shower);
- Pallet for legs.
The tank fastens from above designs at the level of human height height, from the crane on tank the extender is constructed from hose and recorded but it watering cans.
!! That the design has not decayed, wooden or metal components should be processed waterproofing (it can be impregnation or simple film)!!
From advantages - such design can be brought closer to wall of constructions, and the shower very quickly gathers. However such decision you can reduce life cycle of adjacent buildings as moisture will get under the base and on wall.
Before starting construction, it is necessary to execute the drawing, to prepare site. As the tree well absorbs moisture, it is desirable to place shower on well aired place.
- Dig out ditch meter on meter;
- Fill up filling brick in hole (it is possible just stones);!! So the soapsuds from shower will be absorbed to the soil, but not to spread on the site and beds!! Still it is possible to lay pipe in drain hole, then the trench for water drainage in caisson will be necessary.
- Process wooden parts water-repellent materials, impregnation;
- Collect framework according to your scheme (at first the basis gathers, to it beams from bar fasten, the top cross design gathers, then stiffening fins fasten);
- Board framework, lining!! As under the influence of moisture wood bulks up, boards or lining it is necessary to fix with small gap - about 3 mm;
- Apply paint or varnish (the quality products keep materials better);
- Fix tank (depending on your requirements, it is possible to choose tank in 100 or 50 liters).
Mounting of all design will take no more than 2 days. On the crane from tank it is necessary to fix watering can for shower. For convenience make hooks and shelves, under legs lay pallet. The inexpensive and convenient shower is ready!
The same algorithm can use for construction of shower from other materials. If you want, it is possible to buy polycarbonate and the aluminum shape. Such construction will be more capital and corrosion to it is not terrible. Beautiful shower it is possible to make with own hands quickly and cheap!