Many people give preference in the device of modern interior to simplicity and compactness. Any more will seem to nobody strange if in the small bedroom instead of normal bed there is bed cabinet. In such piece of furniture there is huge practical sense, then a lot of place is saved. It is possible to make bed cabinet of normal cabinet.
It is required to you: - centimeter;
- cleansers; - joiner's tools;
- wooden boards; - hook and loop.
Preparation of cabinet
Remove door or doors from cabinet. Remove all regiments and hangers from within. Wash cabinet inside and if necessary paint it. Measure the parties of cabinet inside and width of door opening to decide on the mattress size.
Usually the size of doorway of cabinet is 70 cm in width and 185 cm in height. In wide cabinets where 2 doors are built in, this aperture will be 140 cm and 185 cm respectively.
The back wall of cabinet can be ornamented, pasted over with wall-paper or photowall-paper that beautiful "headboard" has turned out. Height of such ornament has to be 75 cm from floor. It is possible to make panel board or to use any other sheathing material as headboard. Fix the panel on wall by means of drill, fixers and screws.
Collecting body of bed
Make framework for bed of tree. It is better to use pine as material. Connect angular brackets four boards. At construction of single bed length of longitudinal board is 180 cm, width of 8 cm, thickness of 2 cm. Similar to dimensions of cross board are equal 66sm/8sm/2sm. Put on framework from above scaleboard and drill several trial holes through each 25 cm by means of drill. Fix plywood leaf by means of screws. Before continuing, check framework for stability and flatness. If there is desire, it is possible to paint the bed body with paint.
Installation of the hinge and hook for lifting bed
On floor from the middle of wall in cabinet measure 11 cm, make mark. This that space where the bed and accessories will go in. If on floor the carpet lies in this place, make an incision it by means of knife. It is desirable that the floor was clean and wooden. Fasten loop or the hinge screws on bed framework bottom where the head will be located. Apply loop to mark in floor in cabinet and fasten it to floor. On bed framework also note the place for loop for which it will be possible to hook on hook. Fasten loop. Lift bed and note the place where the hook will fasten on wall. Attach hook to wall. Uncouple hook and loop, and lower bed.
If the place in cabinet allows, add cozy strokes. Put on shelves of the book for reading before going to bed, the aromalamp and support under the mobile phone. Do not put in candle cabinet. It is unsafe.
Now on it it is possible to put mattress and sleeping accessories. Check whether the bed with all accessories in cabinet finds room. If it is necessary to correct something or to change, make it. Bed cabinet it is ready.