One of the fastest and beautiful ways of interior decorative finish of the room is pasting of walls wall-paper. The result of renovation depends not only on correctness of performance of work, but also on quality of the pasted-over surface. It is important to do work on its preparation quickly and effectively and, unhanging old wall-paper, not to break the surface disappearing under them.
It is required to you
- - water
- - spray
- - sponge
- - wallpaper tiger
- - liquid for removal of wall-paper
Instruction
1. To unhang two-layer flizelinovy wall-paper, it is necessary to pull for edge of cloth and to separate top layer from lower. On the remained paper basis it is possible to glue new wall-paper at once.
2. Old paper wall covering for fast and easy removal needs to be wetted. Before it surely deenergize all sockets and the switch indoors. Apply warm water by means of spray or sponge. Leave for 10 – 15 minutes for swelling of paper and dissolution of glue. When wall-paper begins to peel off from walls and to bubble, remove them, hooking knife or scraper.
3. If wall-paper badly becomes wet, make on them scratches and cuts, it will allow moisture to get under stronger external layer to paper basis. Use for this purpose knife, the palette or the roller with nails.
4. It is also possible to use for perforation wallpaper tiger. The rotating movements with easy pressing you drive the tool on all surface of old wall-paper. Do not worry about violation of integrity of plaster or plugged covering of walls under wall-paper: thanks to soft wheels on surface from use of tiger there will be no trace left.
5. To increase moisture absorption, steam wall-paper the iron through rag or with the help function of otparivaniye. It is easy to unhang the strongest wall-paper by means of special liquid. Such solutions as Quelid Dissoucol, Atlas Alpan or liquid for removal of wall-paper of Zinsser are widely known. These high-speed highly productive means well penetrate structure of wall-paper and effectively delete them, without destroying at the same time the basis.
6. To spend liquid economically, prepare solution according to type of wall-paper, in accuracy following the instruction on packing. It is abundant moisten wall-paper by means of brush roller or sponge. Wait several minutes until all layers of wall-paper well become impregnated. If it is necessary, repeat wetting.
7. Remember that moistening has to be moderate, too abundant can destroy plaster coat or putties under wall-paper. Do not humidify at once all surface as part it will dry until you process one site.