In the course of assembly of furniture when moving after transportation or long use adjustment of doors quite often is required. Its exterior depends on it. To independently execute adjustment of doors absolutely simply, having the minimum set of tools.
It is required to you
- cross screw-driver
Instruction
1. Examine cabinet doors. Adjustment to the left or to the right is required when gap between two doors uneven or doors go beyond cabinet. Perhaps, also adjustment of door on height is required. If doors unevenly adjoin, then it is necessary to adjust their situation, moving one of adjacent corners forward or back. If the way of fastening of door of cabinet a bit different, and door is established not over aperture, and in it, then in this case loops have a bit different design, but the essence of adjustment remains the same.
2. Open the cabinet door demanding adjustment. Twist the adjustment screw located in the loop body, is closer to door. It serves for adjustment of door to the left or to the right. Achieve such situation that the door face completely coincided with cabinet face, and the gap between doors was uniform and coincided with gaps on other facades if they are available. If between doors there is lock, then it has to function.
3. Turn off screws which loops to the cabinet body fasten on several turns to lift or lower door. Openings under these screws in loop have not round, but oval form, they are located vertically. Move door together with loops a little up or down to necessary situation. If door large-size, then it is possible to help itself durable legs. As a result of such adjustment the corners of adjacent doors have to coincide with each other.
4. Weaken the screw located in loop the second from door. Now the door has opportunity to change the situation in the plane back and forth around this loop. This type of adjustment is necessary and in case the door is equipped with magnetics.