In eurowindow one frame with double-glazed window instead of two with glasses is used. After installation of such double-glazed windows the guarantee for case of emergence of malfunctions surely is given. But if the guarantee has ended, and the window began to function worse, to eliminate with vozhno the main malfunctions independently.
- — rubber hammer;
- — universal, double-sided screw-driver;
- — adjusting hexagon;
- — chisel.
1. If the window shutter slightly rubs clean, for a start define the place of overwriting aurally and visually. Begin to strike blows with rubber hammer of average force to impost. Move from problem corner on all height of impost. Having leveled impost, align the same way window shutter.
2. To eliminate overwritings of shutter of window about frame, adjust the lower loop. For this purpose remove from it decor and by means of adjusting hexagon rotate the screw of loop of internal pin, you will not lift the lower point of eurowindow over frame yet and do not stop thus overwriting below.
3. To reach the top point of adjustment, crack window and find adjustment screw under hexagon. Rotate the screw until you adjust the provision of shutter of rather upper part of frame.
4. If overwritings do not clean up by means of adjustment by screws, by means of chisel accurately cut off the rubbing clean place on shutter. When cutting you carry out by chisel from top to down that on the processed surface edge fins were not formed.
5. If degree of clip of windows has changed, adjust clamping pins of the lock of accessories. For this purpose take adjusting hexagon or the screw-driver and rotate in turn each pin, increasing or reducing effort of clip.