The door from any material shrinks within half a year. It can warp, settle or its edge will rise. Besides, in plastic windows at frequent opening the mechanisms, fastenings and loops can be loosened. If the door is on warranty period of the company which has made it, has established and has initially adjusted, then adjustment can be led by the staff of the company. At the termination of term of after-sales service, it is possible to adjust door mechanisms independently.
It is required to you
- - hexagonal wrenches with size from 2.5 to 5 mm;
- - crosstip screwdriver and flat blade screwdriver.
Instruction
1. Define in what places fixing mechanisms of door are located. Examine and find out their device. In spite of the fact that the accessories of doors are quite various, all it is suited by the same principle. Therefore it will not be difficult to carry out adjustment of the mechanism of plastic door.
2. Find screws which are located in door hinges. As a rule, in their each fastening happens three. As the standard plastic door fastens on four or five loops, you should find 12-15 screws. Remember that all adjusting screws can be hidden under protective or camouflage covers most of which often perform decorative function. All these covers should be removed.
3. Open doors to the maximum situation. As soon as you have found fixing mechanisms, it is necessary to remove the visible fixing screw with use of hexagonal wrench. After the made manipulations it is necessary to close door and to remove decorative elements. Here mechanisms at which change of situation it is possible to carry out control of door in the horizontal direction are located. It is possible to see horizontal screw which is tightened when using hexagonal wrench.
4. Adjust the top loops. If it is necessary to tighten the edge of door opposite in relation to screws it is worth lifting screws in two top loops. If you need to lift all cloth of shutter, then it is necessary to regulate all three or four loops. The same manipulations will help to adjust correctly screws in relation to the left or right side. You can adjust condition of door median level by means of crosstip screwdriver.