Windows from polyvinylchloride have high consumer qualities, they are esthetic, convenient in operation, provide protection against noise and perfectly preserve heat in the dwelling. However these advantages are guaranteed only in case the plastic window is correctly adjusted.
It is required to you
- Hexagonal wrench No. 4
Instruction
1. Examine plastic window. Find out whether the distortion design has, whether densely the shutter adjoins to frame. Violations in adjustment can be caused not only by dishonesty of assemblers, but also window operating conditions. From long use the constructive parts can become loose, and laying – to undergo wear. Many problems, for example blowing, it is possible to eliminate only after the correct diagnostics of fault.
2. Execute adjustment of window in the horizontal and vertical direction. It is carried out by manipulations with the top and lower loops. To get access to loops, the shutter should be opened in the beginning.
3. Establish hexagonal wrench in the corresponding opening of the top loop. When you rotate the tool in the direction of the course of hour hand, the shutter is attracted to the place of fastening, at rotation of key in the opposite direction the shutter departs from loop; at the same time the opposite lower part of window falls. Achieve the correct provision of shutter.
4. For elimination of distortion of shutter down insert hexagon into opening of the lower loop. To get access to opening, it is required to cast away the protective cap located on loop. Rotating key clockwise, you will lift shutter, at reverse rotation it will fall.
5. Carry out adjustment of degree of clip of shutter of plastic window. It is carried out by means of change of position of clowns who are established on window perimeter. Function of clowns is in that at turn of the handle to come into clamping platforms, than and the shutter adherence to frame is reached. More densely to press shutter to window frame, turn the clown clockwise. In most cases it eliminates blowing.
6. Consider that the more densely the shutter is pressed, rather sealant wears out. Therefore it is recommended to use the reception described above at the onset of cold weather, and for the period of summer season to return clowns to former situation again. In this case the window will serve longer, without demanding preventive repair.