The Chinese doors are very demanded. They are considered as the optimum choice for those who are not going to overpay for goods. And though at many the Chinese products are associated with "consumer goods", you should not give in to opinion of the majority, availability of metal Chinese doors does not speak about low grade of these goods at all. Besides, simply and to adjust the established Chinese door.
It is required to you
- - lubricant;
- - rubber sealants;
- - tools.
Instruction
1. Examine attentively established Chinese metal door and try to find out the reason for which scratches reach and to define the place from where they go. In most cases loops of door creak or the sound results from friction of metal door cloth about box.
2. If the scratch reaches from door hinges, then grease them. It will allow to avoid further the repeated inconveniences caused the Chinese door which is not adjusted by work.
3. One more reason because of which door hinges can creak - has got to loops dust. The reason of it can be the most various, for example, in the apartment repair works are carried out (and as is well-known, during repair of dust and dirt it is more than enough). Blow internal loops then grease them with special lubricant.
4. If outer Chinese doors pass drafts, cold and noise, then it is necessary to take care of noise isolation of such door assembly. In this case rubber sealants by means of which execute warming of outer door can be necessary.
5. Adjustment of outer Chinese door is carried out in the following sequence: weaken average loops, after that execute weakening of the lower or top loop (the choice of loop depends on the place from where the scratch reaches). Delay cloth of metal door or move to box, tightening at the same time the nuts located at extreme loops.
6. After it to poshatayta door: it needs to be made in order that nuts have taken the places. Then open outer door and close it with the lowered handle, listening at the same time whether there is no extraneous noise or scratch. If it was not succeeded to solve problem, do all operations connected with control of the Chinese door, repeatedly.