""Jumps mountain gantry on tile"" - so often speak about incorrectly installed washing machine. If not to adjust its situation in the bathroom or in kitchen, it is possible to receive the unit which is jumping up at extraction and drying. If it is your case, then look in what way your machine fastens, and modify it.
It is required to you
- - plywood;
- - tools;
- - liquid nails;
- - dowel.
Instruction
1. First, check surface on which your washing machine is installed. If floor uneven - there is it though tiled though concrete - anyway the household appliance will not rise as it is necessary. And it means that at the slightest vibration the machine will jump up and move a little. If it is your case, then surely level floor. And then actually washing device will not regulate it is necessary.
2. If at gender of you equal, look on how there were washing machines legs. For this purpose accurately and without special enthusiasm try to poshatat a little the machine back and forth. It is possible to try ponaklonyat it here and there. It will help you to understand what legs need to be regulated.
3. Now start directly adjustment. For this purpose at that leg at which it is necessary slightly weaken washer and twist leg clockwise or counterclockwise. It will also be its adjustment. To understand whether exactly you have legs now, use water level. If you have made adjustment correctly, the bubble has to be strictly on the center. For measurement place the center from above the washing machine. If everything is all right, tighten washer; if is not present - repeat scrolling anew, carefully selecting the necessary situation.
4. The additional device can be necessary for you for alignment and adjustment of some types of washing machines. Take veneer sheet and cut out from it preparation for creation of the small platform. Then bring together her and attach to floor - it is possible by means of dowels, it is possible ""to put"" her on liquid nails. Only it is necessary to do it near fixing places of all available support.
5. There is also national method of how it is possible to adjust the washing machine on level. Wipe floor under the device very sweet water and at once put the unit on this place. It has to be pasted tightly to surface. Way, of course, a little doubtful. But those who have tried to make quite so, assure that it works.