Many for certain came up against situation when in cold season suddenly turned off heating. It is in that case very good to have near at hand self-made heating appliance which will not depend on communications.
It is required to you
- - battery;
- - expansion tank;
- - pipes;
- - film;
- - metal capacity;
- - sealant.
Instruction
1. Take the metal capacity which will have to heat up from sunshine. It is desirable to take capacity with big area and small volume. It is possible to use the battery or any capacity of cubic form. Capacity will perform functions of the oven. Liquid in it will heat up under the influence of sunshine.
2. Isolate capacity from heat waste, having covered it with film. So you will create air layer, at the same time the covering will not interfere with penetration of sunshine. Something will turn out like the greenhouse.
3. Connect pipes, provide waterproofing by means of sealant.
4. Install from above systems expansion tank. The tank is necessary to consider possibility of change of volume of water during heating or cooling. As tank it is possible to use any open capacity.
5. Connect pipes to expansion tank. The pipe has to enter tank and to leave it. It is also possible to use hoses.
6. Having used sealant, create waterproofing.
7. Install indoors or other room which needs to be heated the battery. Via it water will give the saved-up heat to the room.