The mixer is the sanitary device in which two functions – inclusion of cold and hot water are connected. To independently assemble the mixer – business not difficult. But sometimes nevertheless it is required to break the head as types of this device exists quite a lot.
It is required to you
- Crane head with rod, flywheel, the valve and spindle in the mixer body.
Instruction
1. Before that, how to collect mixer, surely block water.
2. Decide on the sequence of actions. You have to represent and understand well that you do. It is recommended to separate all working process into two main stages – installation of clowns and fastening to them directly the mixer.
3. Establish clowns without pressurizing subhanks so far. Make sure that they it is free and without distortions are wrapped. If clowns turn out too long or short, you have opportunity to get others. Lean against faces of clowns some rigid flat subject and make sure that there are no gaps anywhere.
4. Remove clowns, having remembered quantity of turns of their twisting and the sector of shift. Now it is necessary to make the pressurizing winding, using flax, FUM the tape or ftoroplastovy thread called also Uniloky. Make sure that the winding densely adjoins to thread, and fasten clowns by means of adjustable or wrench. Thread speed usually is four-five.
5. Check faces for availability of gaps, horizontal position of exits and correctness of distance of clowns between centers. If something is wrong, it is necessary to try to correct. Otherwise it is possible to fasten decorative reflectors.
6. Now it is possible to pass to installation of the mixer. If at set to it there is tough laying (paronitovy or fiber), they need previously to be killed in cold water for about five minutes. If laying silicone or rubber, them it is possible to use at once.
7. Acquire the mixer, putting the clamps hands in the beginning, and then by means of extension wrench. It is necessary to put the clamps gradually in turn to achieve uniform consolidation and to avoid distortion. Now installation is completed.
8. To assemble the mixer correctly, the attentiveness and accuracy will be required. Remember that each part and element have to be strict on the place.